Machine type MC-07
Power Generation Hire in Australia
Diesel generators, lighting towers, distribution boards and temporary power from 2 kVA to multi-megawatt.

Temporary power hire supplies electricity where grid power is unavailable, insufficient or offline for maintenance. Generator sizing is more than adding up running loads. Motor starting current, step loads, power factor and duty cycle all matter. Underloading a diesel generator for long periods can also cause wet-stacking. Distribution, earthing, fuel and compliance with AS/NZS 3012 site wiring requirements are part of the brief.
01 · The fleetCommon power generation options
| Machine | Best suited to |
|---|---|
| Portable generators (2–10 kVA) | Small tools and short-term trades work. |
| Towable & skid generators (20–500 kVA) | Site sheds, cranes, pumps, events and building backup. |
| Large containerised generators (500 kVA+) | Shutdowns, data centres, mines and utility backup. |
| Lighting towers (diesel, solar, hybrid) | Night works, roadworks, events and security lighting. |
| Distribution boards & cabling | Getting power safely from generator to loads, with RCD protection. |
| Load banks | Testing generators and UPS systems under controlled load. |
02 · ApplicationsWhat it's hired for
- Construction site temporary power
- Planned outage and shutdown backup
- Events and temporary venues
- Remote camps and mine sites
- Night roadworks lighting
- Emergency and storm response
03 · PricingWhat affects the hire rate
Hire rates for power generation vary by supplier, location and season. A lower daily rate can cost more once transport, minimum hours and extras are added. Compare quotes on these drivers:
- kVA rating and fuel tank size
- Weekly/monthly versus daily rates
- Fuel supply and refuelling service
- Distribution boards, cabling and install
- Electrician for connection and testing
- Noise-attenuated (silenced) enclosure
See how to compare machinery hire quotes on equal terms.
List every load with its running and starting current, plus the hours of operation and how far the generator sits from the loads. Include any sensitive electronics.
FAQPower Generation Hire FAQs
What size generator do I need?
Total the running loads, then allow for the largest motor's starting current and any simultaneous starts. Add headroom without grossly oversizing, which leads to light-load problems. The supplier or an electrician should confirm the size from your load list.
Who connects a hired generator to a building?
Connection to fixed wiring must be done by a licensed electrician using an approved changeover or connection arrangement. Never back-feed a building's switchboard.
How often do generators need refuelling?
It depends on tank size and load. Ask for the fuel consumption at your expected load. Arrange refuelling or an auxiliary tank for continuous operation, with spill containment where required.
GuidesRelated selection guides
Supplier directory
Power Generation Hire suppliers by state
19 listed suppliers. Confirm the dispatch depot, fleet and service coverage for your site directly with each company.
Power Generation Hire: Australian Capital Territory (2)
PremiAir Hire
ACT · National
Power Generation Hire: New South Wales (9)
Ezyquip
NSW
Flexihire
NSW
Gaamben
NSW
Kennards Hire
NSW · National
Master Hire
NSW
Onsite Rental Group
NSW · National
PremiAir Hire
ACT · National
Renteca
NSW · National
Tutt Bryant Hire
NSW · National
Power Generation Hire: Northern Territory (5)
Power Generation Hire: Queensland (6)
Power Generation Hire: South Australia (4)
Power Generation Hire: Tasmania (2)
Tutt Bryant Hire
NSW · National
Power Generation Hire: Victoria (1)
Tutt Bryant Hire
NSW · National
Power Generation Hire: Western Australia (2)
Renteca
NSW · National
Tutt Bryant Hire
NSW · National
Other machine types